Restoration of the fire and damaged properties to their original condition before the loss. Due to the damage caused by the fire, cleaning and restoration could be a lengthy process that can take weeks or even months. For example, building boards up, demolition and reconstruction over the rubble, smell and soot removal, cleaning the contents and removing any risks such as asbestos and lead. Asbestos is all part of the restoration process after a fire.
How To Restore a Fire Damage
The fire damage repair contractor has to first obtain authorization from an authority that licenses them before they’re allowed to visit the property to assess the extent of the fire damage. Contractors could otherwise be in a dangerous circumstance and be at risk of injury.
This is how the restoration process usually progresses once they have to access the property.
Fire damage professionals will assess the damage caused by the flames and the subsequent water intrusion after confirming that it’s appropriate to go into the structure. Any cleaning is usually determined by how far the fire and smoke penetrated the structure. The process also includes an examination of the house’s contents to determine what must be removed and what can be repaired. For other details, click on this link to learn more about property restoration.
After an in-depth assessment, The restoration firm will have a clearer idea of the project’s scope and the length of time the project will last and can start estimating the cost.
Property Security and Debris Removal
After the evaluation, the property needs to be secured. This means putting up a fence around the property, cleaning up the area, fixing any holes in the building, and sealing or tarping any parts of the roof that were not damaged by the fire. In this situation, restoration experts like Puroclean in Northport, AL, need to ensure this area is separated from the affected area to avoid cross-contamination.
Water Mitigation, Demolition, and Dry Out
In this phase, it is important to get rid of the water and dry the building to stop further growth of corrosion or mold damage. Personal belongings are removed from the interior of the building. If required, damaged flooring, drywall, and other materials will be removed to studs. Like in water damage restoration in Northport, the water removal crews will employ industrial equipment for drying the structure. Roof tarps are used during this time to stop further water intrusion.
Cleaning and Smoke Removal
Cleaning is the longest element of a fire restoration project. It usually involves lots of manual labor to clear smoke and soot off the interior and exterior surfaces on time. In many instances, the entire area of the affected area has to be scrubbed. After a thorough cleaning, the deodorizing agent eliminates the lingering smoke smells.
If restoration of water damage was performed, cleaning or using antimicrobial chemicals could be required to avoid any further growth of mold. The removed contents are likely to be restored to the pre-loss condition. Cleaning includes the removal of any smoke, soot, or dust that may have accumulated within the air ducts.
Construction & Restoration
The last step to restore the property to pre-loss conditions is to fix any damage caused by fire or rebuild areas damaged by fire. For example, in the initial fire inspection, certain areas of the structure could not be salvageable and had to be removed and replaced. This could mean building and the ceiling, electrical, drywall flooring, and countertops in the interior fixtures and returning the property to its condition before the loss.